BMA Connectors

 

Key performance
Characteristic Impedance : 50 Ohm
Frequency range : 0~22GHz
Contact resistance :
Center conductor ≤ 2.0m Ohm
Out conductor ≤ 2.0m Ohm
Insulation resistance : ≥ 5000M Ohm
Insulator voltage withstanding : 1500V
VSWR : ≤ 1.30
Connector durability :1000 cycles
Applicable spec/std : GJB681A DIN47297

Material
Center contacts:
Male---brass, gold plated.
Female---beryllium copper, gold plated
Bodies other metal parts:
brass, gold plated
Insulators: TFE
Crimp ferrule: copper, nickel plated.
Gasket and seal rings: silicone rubber
Heat-shrink tubing: thermofit plastic.
crimp ferrule: copper, nickel plated

seal rings: silicone rubber

 

 

 

BMA Dimensions

 

BMA-JYB2/3
BMA-JFB2
BMA-KB2
BMA-KWFB2
BMA-KYB2/3
BMA-JYB2/3 Connector
BMA-JFB2 Connector
BMA-KB2 Connector
BMA-KWFB2 Connector
BMA-KYB2/3 Connector
BMA-KFB2/3/5
BMA-JFB3
BMA-JY3/5
BMA-KY3/4/5
BMA-KF3/4/5
BMA-KFB2/3/5 Connector
BMA-JFB3 Connector
BMA-JY3/5 Connector
BMA-KY3/4/5 Connector
BMA-KF3/4/5 Connector
BMA-JFD6/7
BMA-JFD1/3/4
BMA-JFD2
BMA-JFD9/A
BMA-JFD10
BMA-JFD6/7 Connector
BMA-JFD1/3/4 Connector
BMA-JFD2 Connector
BMA-JFD9/A Connector
BMA-JFD10 Connector
BMA-KYD
BMA-KYD1
BMA-KFD1
BMA-KFD2
BMA-JFD8G
BMA-KYD Connector
BMA-KYD1 Connector
BMA-KFD1 Connector
BMA-KFD2 Connector
BMA-JFD8G Connector

 

2065 B Winchester | Campbell California 95008 | Tel: 408 374 1031 | Fax: 408 374 7231

SEI manufactures: RF & Microwave Connectors, Adapters, Aluminum Cast and Machined Boxes, Attenuators, Terminations & Loads, Ferrite Isolators & Circulators, Power Dividers & DC Blocks, GPS & GSM Antennas, 75 Ohms Connectors & Adapters, Coaxial to Waveguide adapters, Cable Assemblies, SMA, SMB, SMC, N, L9, L29, 7/16, MCX, MMCX, SMP, SSMA, SSMB, TNC, 2.4mm, 35mm, along with other microwave and RF components both custom and standard.

2008 Senah Inc.