BNC 75 Ohm Connectors

 

Key performance
Characteristic Impedance : 75 Ohms
Frequency range : 0~2GHz
Contact resistance :
Center conductor ≤ 2.0m Ohms
Out conductor ≤ 0.2m Ohms
Insulator voltage withstanding : 1500V
VSWR : ≤ 1.30
Applicable spec/std : MIL-C-39012
Insulator Resistance: ≥ 5000M Ohms
Connector durability : 500 cycles

Material
Center contacts:
Male---brass, gold plated.
Female---phosphor bronze, gold plated
Bodies and other metal parts:
brass, nickel plated
Insulators: TFE
Crimp ferrule: copper, nickel plated.
Gasket and seal rings: silicone rubber
Heat-shrink tubing: thermofit plastic.

 

 

 

BNC 75 Ohm Interface Dimensions

 

BNC-75J2.5C-75J616YA
BNC-75J4YA-75J616Y
BNC-75JW4Y/A
BNC-75KY3Y
BNC-75KY3YA/4YA
BNC-75J2.5C-75J616YA Connectors
BNC-75J4YA-75J616Y Connectors
BNC-75JW4Y/A Connectors
BNC-75KY3Y Connector
BNC-75KY3YA/4YA Connectors
BNC-75KY3YB
BNC-75KY3YC
BNC-75KF
BNC-75KHD
BNC-75KHD1
BNC-75KY3YB Connector
BNC-75KY3YC Connector
BNC-75KF Connector
BNC-75KHD Connector
BNC-75KHD1 Connector
BNC-75KYWHD
BNC-75KYWHD1
BNC-75JJ
BNC-75KK
BNC-75KKY
BNC-75KYWHD Connector
BNC-75KYWHD1 Connector
BNC-75JJ Connector
BNC-75KK Connector
BNC-75KKY Connector

 

 

2065 B Winchester | Campbell California 95008 | Tel: 408 374 1031 | Fax: 408 374 7231

SEI manufactures: RF & Microwave Connectors, Adapters, Aluminum Cast and Machined Boxes, Attenuators, Terminations & Loads, Ferrite Isolators & Circulators, Power Dividers & DC Blocks, GPS & GSM Antennas, 75 Ohms Connectors & Adapters, Coaxial to Waveguide adapters, Cable Assemblies, SMA, SMB, SMC, N, L9, L29, 7/16, MCX, MMCX, SMP, SSMA, SSMB, TNC, 2.4mm, 35mm, along with other microwave and RF components both custom and standard.

2008 Senah Inc.