SAA Connectors

 

Key performance
Characteristic impedance: 50 Ohm
Ferquency range: 0~6G
HzContact resistance:
Center conductor : ≤ 10.0m Ohm
Out conductor : ≤ 3.0 m Ohm
Insulation resistance : ≥ 1000M Ohm
Insulator voltage withstanding : 750V
VSWR : ≤ 1.35
Connector durability : 500
Applicable spec/std: DIN47297

Material
Center contacts:
Male---brass, gold plated.
Female---beryllium copper, gold plated
Bodies and other metal parts:
brass, gold or nickel plated
Insulators: TFE
Crimp ferrule: copper, nickel plated.
Gasket and seal rings: silicone rubber
Heat-shrink tubing: thermofit plastic.

 

 

 

SAA Interface Dimensions

 

SAA-KYB3
SAA-KYB3A
SAA-J2.5C
SAA-KY3
SAA-KYB3 Connector
SAA-KYB3A Connector
SAA-J2.5C Connector
SAA-KY3 Connector
SAA-KHD
SAA-KYHD/1
SAA-KWHD
SAA-KYWHD1/3/4
SAA-KFD
SAA-KHD Connector
SAA-KYHD/1 Connectors
SAA-KWHD Connector
SAA-KWHD1/3/4 Connectors
SAA-KFD Connector

 

 

2065 B Winchester | Campbell California 95008 | Tel: 408 374 1031 | Fax: 408 374 7231

SEI manufactures: RF & Microwave Connectors, Adapters, Aluminum Cast and Machined Boxes, Attenuators, Terminations & Loads, Ferrite Isolators & Circulators, Power Dividers & DC Blocks, GPS & GSM Antennas, 75 Ohms Connectors & Adapters, Coaxial to Waveguide adapters, Cable Assemblies, SMA, SMB, SMC, N, L9, L29, 7/16, MCX, MMCX, SMP, SSMA, SSMB, TNC, 2.4mm, 35mm, along with other microwave and RF components both custom and standard.

2008 Senah Inc.